1Shot Colour Charts & Info

1Shot Colour Chart Page

 

  Click Headings below to jump straight to the desired information






1Shot ® Lettering Enamel

1 Shot ® Lettering Enamels are oil based, high gloss sign paint enamels for interior and exterior use on metals, wood, glass, enamel receptive banners and vinyl, vehicle lettering, pinstriping and graphics. They have been the benchmark in lettering enamels for over 50 years. 1 Shot Lettering Enamels have outstanding hiding, durability and fade resistance. Superior flow characteristics assure the virtual absence of brush marks and provide a clean, sharp edge.

 

1 Shot ® LETTERING ENAMELS INFORMATION

1 Shot ® LIMITATIONS - Best results, including drying times, will be achieved when temperature is above 18°c.

1 Shot ® APPLICATION - Brush, Roller, Spray or Airbrush.

1 Shot ® THINNING - Reduce with 1 Shot Reducers - 6001 Low Temp / 6002 High Temp / 6000 Chromo Flow.

1 Shot ® DRYING - Normally dry to the touch in 2 - 5 hours / to handle in 8 - 12 hours / Recoat in 12 - 16 hours.

1 Shot ® CLEANUP - Brushes: 4004 Brush Cleaner / Equipment: Mineral Spirits.

 

Click here to open a 1 Shot ® Lettering Enamel Colour Chart
      Click here to open 1 Shot ® Frequently Asked Questions




1Shot ® Pearlescent Enamel

1 Shot ® Pearlescent Enamels are oil based, high gloss enamels for exterior use on metal, glass, wood, vehicle graphics and pinstriping. Translucent rather than opaque, Pearlescent colours may require underpainting and are subject to showing brush marks. Excellent for creating transparent washes and glazes when suspended in 1 Shot 4003 clear. Pearlescent colours display a brilliant luster under high intensity light or direct sunlight.

 

1 Shot ® PEARLESCENT ENAMELS INFORMATION

1 Shot ® LIMITATIONS - Best applied between 18°c and 30°c. Will not dry below 10°c.

1 Shot ® APPLICATION - Brush, Roller, Spray or Airbrush.

1 Shot ® THINNING - 1 Shot 6000 Series Reducers as needed.

1 Shot ® CLEANUP - Brushes: 4004 Brush Cleaner / Equipment: Mineral Spirits.

 

Click here to open a 1 Shot ® Pearlescent Enamel Colour Chart
      Click here to open 1 Shot ® Frequently Asked Questions





1Shot ® Fluorescent Enamel

1 Shot ® Fluorescent Enamels are semi-transparent, high intensity UV reactive oil based flat finish paints with sparkling colour clarity. For use on interior and very short-term exterior projects only, 1 Shot Fluorescent Colours should be applied over a white background for optimum intensity. Prone to showing brush marks and overlaps, 1 Shot Fluorescent Colours should be sprayed, rolled, screen printed or applied in a single stroke fashion.

 

1 Shot ® FLUORESCENT ENAMELS INFORMATION

1 Shot ® LIMITATIONS - Best applied between 18°c and 30°c. Will not dry below 10°c.

1 Shot ® APPLICATION - Brush, Roller, Screenprint, Spray or Airbrush.

1 Shot ® THINNING - 1 Shot 6001 Low Temp Reducer.

1 Shot ® CLEANUP - Brushes: 4004 Brush Cleaner / Equipment: Mineral Spirits.

 

Click here to open a 1 Shot ® Fluorescent Enamel Colour Chart
      Click here to open 1 Shot ® Frequently Asked Questions





1Shot ® Top Coat Clears

1 Shot ® and Chromatic ® Clears and products surely have the right clear topcoat sign paint for your application. Oil based Enamels, Acrylics, Urethanes and even Waterborne Clears mean that choosing within our oneshot sign paint range is clearly your best option for perfect results. 

 

1 Shot ® TOP COAT CLEARS & PRODUCTS INFORMATION

1 Shot ® 4003 TOP COAT CLEAR -

An oil based clear finish, this is essentially a clear lettering enamel, and is ideal for use in top coating surface gilds and as a vehicle in which to suspend other 1 Shot products to create translucent and transparent glazes, washes and shading mediums. This product may also be used to restore gloss levels on older signs originally painted with 1 Shot, and is also compatible as a top coat for all 1 Shot Pearlescent enamels.

  

1 Shot ® 4005 Gloss / 4015 Satin SPEED DRY UV ACRYLIC CLEAR -

A fast drying acrylic clear topcoat designed for providing color fade, UV depletion and mild abrasion resistance on printed vinyls and print media. It serves well as an edge sealer on multi-layered vinyls, PVc, PVF and metalized polyester films. Subject to rewetting in extreme heat or when contacted with certain cleaning chemicals, it is not recommended for use on vehicle graphics.

 

1 Shot ® 220F FLUORESCENT UV TOPCOAT CLEAR -

Specifically designed as a topcoat for 1 Shot oil-based fluorescent colors only, 1 Shot 220F offers some extension to the life of 1 Shot Fluorescent Colours by increasing protection against ultraviolet light.

  

1 Shot ® 4008 FAST DRY GOLD SIZE -

An exceptional self-levelling and fast setting size for use in gilding. Designed to retain elasticity, engine turning and burnishing can usually be accomplished up to five hours after gilding. 1 Shot Fast Dry Gold Size generally allows the application of 22 and 23 carat gold leaf within an hour, and less precious and heavier metal leaf products sooner.

 

Chromatic ® 4329500 CLEAR FLATTENING PASTE -

Mixing with 1 Shot Lettering Enamels or Chromatic Bulletins, Clear Flattening Paste will modify gloss levels for both interior and exterior use. A 1:1 mix ratio will result in a nearly dead flat finish, with lesser amounts yielding varying degrees of gloss ranging from semi-gloss to eggshell.

 

    Click here to open 1 Shot ® Frequently Asked Questions





1Shot ® Reducers & Additives

As important as using 1Shot ® Lettering Enamels, the finest sign paint and graphic products available, it's equally important to use our full line of oneshot reducers and additives, engineered specifically for complete compatability. 1 Shot ® Reducers, Hardeners and our famous oneshot Brush Cleaner.

 

1 Shot ® REDUCERS & ADDITIVES INFORMATION

1 Shot ® 6000 CHROMO FLOW / FLOW ENHANCER -

Chromo Flow is designed to act as a flow enhancing additive for use with brush applications of 1 Shot Lettering Enamels and Chromatic Bulletin Colors. Not to be mistaken as a reducer, when used sparingly, will increase brush control, decrease brush drag and enhance flow and levelling characteristics, and is especially suitable for lettering and pinstriping applications.

  

1 Shot ® 6001 LOW TEMP REDUCER -

Formulated to improve flow and levelling at low temperatures by reducing viscosity and accelerating the evaporation process without significantly reducing the quality of the coating. It is ideal for spray and airbrush applications, as it exhibits superior atomization.

 

1 Shot ® 6002 HIGH TEMP REDUCER -

Formulated to improve flow and leveling at high temperatures by reducing viscosity and retarding the evaporation process without significantly reducing the quality of the coating. It is ideal for lettering, graphics and pinstriping applications.

 

1 Shot ® 4004 BRUSH CLEANER -

A premium brush cleaner designed to not only thoroughly clean oil based paints from quality, natural hair brushes, but to do so without damaging the hair of the brush. Unlike harsh spirits and reducers, our Brush Cleaner and Conditioner softens and conditions the brush and can even be used to restore partially hardened natural and nylon brushes, all without interferring with the properties of oil based sign paints.

 

1 Shot ® 4007 HARDENER -

Designed to accelerate drying time for all 1Shot Background, Lettering and Pearlescent Enamels as well as Chromatic Bulletins. It can, in many cases improve adhesion qualities as well as extend colour life and increase gloss retention. It is also required in anticipation of using any enamel or urethane topcoats over catalyzed 1Shot.

 

    Click here to open 1 Shot ® Frequently Asked Questions



 

Click here to go to our complete 1 Shot ® Range             Click here to open 1 Shot ® Frequently Asked Questions

 

1 Shot Paint, Krylon, 3M, Olfa, Macsim, NDK, One Way Film, Carbon Fibre, VHB Tapes, Stand Offs | Sign vinyl supplies wholesale || Sign Supplies Canberra | Sign Supplies Sydney
Sign Supplies Darwin | Sign Supplies Gold Coast | Sign Supplies Brisbane | Sign Supplies Adelaide | Sign Supplies Tasmania | Sign Supplies Melbourne | Sign Supplies Perth
Sign Supplies ACT | Sign Supplies NSW | Sign Supplies NT | Sign Supplies QLD | Sign Supplies SA | Sign Supplies TAS | Sign Supplies VIC | Sign Supplies WA